Furnace Cleaning Edmonton

Home » Posts tagged "Furnace repair Edmonton"

Furnace Cleaning in Edmonton Call 780 733-1256

Furnace Cleaning Edmonton

Furnace Cleaning Edmonton

 

 

With many years of experience repairing furnaces in the Edmonton area, we can guarantee that we will provide you with knowledgeable, experienced and professional service!

 

Does your furnace need to be serviced? Unsure if you need the help of a professional?

Give us a call anytime for a consultation on your situation. You can also fill out our furnace repair form below and a Legacy Heating and Cooling representative will contact you to schedule an appointment.

How often should you have your furnace cleaned?

How often should you have your furnace cleaned

A gas furnace should be serviced at least once a year, preferably, though, in both the spring and the fall. Annual maintenance, including a thorough examination and cleaning of the parts that commonly malfunction, like the air filter, the fan, the pilot light, and the heat exchanger, can usually prevent these problems.

How much does it cost to have your furnace cleaned?

How much does it cost to have your furnace cleaned

Expect to spend anywhere from about $80 to $100 for a furnace tune-up, but more if repairs are also needed. Many companies offer service contracts or maintenance plans, which may reduce the cost of an annual visit from a pro and provide other benefits

What is included in a furnace cleaning?

What is included in a furnace

The most important items on the furnace tune-up checklist include: Cleaning — The outdoor unit, blower, fan blades, and drain line all tend to get dirty and dusty over time. Inspection — We look for cracks, wear and tear, and other signs of future furnace problems.

Is furnace cleaning necessary?

Is furnace cleaning necessary

Duct cleaning has never been shown to actually prevent health problems. Neither do studies conclusively demonstrate that particle (e.g., dust) levels in homes increase because of dirty air ducts. This is because much of the dirt in air ducts adheres to duct surfaces and does not necessarily enter the living space


Some Great Tips from Service Champions

A furnace is crucial for comfort and survival in cold winter weather. Without it, we would still be huddling around wood fires to stay warm. Unfortunately, furnaces need regular professional tune-ups and homeowner upkeep to run strongly and efficiently.

Even with proper maintenance, however, furnaces can break down and develop problems that impede regular functioning. If your furnace is acting up or refusing to turn on, go over these furnace troubleshooting tips first, before you call in the pros.

Check furnace filter

Furnace repair Edmonton

The first thing you want to check is the air filter. Over time, furnace filters get dirty. Dirt and dust can quickly clog the filter, which impedes airflow, worsens indoor air quality, and can even prevent the furnace from turning on in some cases. It can also become a fire hazard and cause premature breakdowns due to excessive dust and dirt. Turn your thermostat off and flip the furnace switch off before you conduct any work on the furnace. Check your air filter every 30 days (set calendar reminders). Hold your filter up to a light source — if light cannot pass through easily, it should be cleaned or replaced. When installing your new filter, remember that the arrows should point in the direction of the airflow. Make sure you properly secure the access panel.

 

Check the thermostat

Furnace repair Edmonton

After verifying that your furnace filter is clean and installed properly, check the thermostat. Make sure it is set to “heat” and try setting the temperature at least 5 degrees higher than the current room temperature. If the thermostat needs new batteries, replace them. For electromechanical thermostats, you may need to open it up and give it a gentle dusting. Use a soft paintbrush or something similar to lightly brush off dirt and dust, including around the metal coils and contact plates. If your brush is too large, try a soft paper. Check the location of your thermostat and make sure it isn’t receiving any false readings from sunlight, lamps, ovens, space heaters, or any other heat source. If the thermostat is receiving the wrong input, it will send out the wrong output.

 

Check furnace switch and electrical panel

Furnace repair Edmonton

Sometimes, the filter and thermostat are fine. Instead, power could be the problem. Check the furnace switch located near the furnace. Someone may have accidentally turned it off. Try flipping it back on. If that doesn’t work, head to the electrical panel. Make sure power is turned on at the breaker box or fuse box. If your breaker box is properly labeled, make sure the HVAC breaker is on. Even if you don’t have any labels, look for the breaker switch that is in the opposite direction of the rest. That is the breaker you want to switch back on with the rest. To reset your breaker, flip the switch all the way off before flipping it back on again. You should hear a click. To restore power to a fuse box, look for a melted and discolored fuse. Unscrew the fuse and replace it with the exact same size and type of fuse. The best way to find fuse replacements is to go to the store with a current fuse and replace it with an identical one. Turn your furnace switch on and see if this restored power to your furnace. If the power is still out or the breaker continues to trip, contact a professional. Warning: Make sure your hands and feet are completely dry before attempting to reset power. If there are any signs of electrical damage or moisture, or you don’t feel comfortable, don’t touch anything and contact a qualified electrician right away.

 

Check furnace flame

Furnace repair Edmonton

Your furnace flame should be a healthy blue color, with perhaps a small yellowish tip. The blue flame indicates that your gas furnace is burning the fuel safely and efficiently. If the flame is red, yellow, purple, green, or any other color than blue, contact a professional right away. Never attempt to fix your furnace flame color on your own.

 

Pilot light and gas valve

Furnace repair Edmonton

If you go to check the furnace flame and it is out, you will need to relight it. While you can relight the pilot on your own, be extra careful and consult your owner’s manual for proper instructions. Don’t forget to turn off the gas for around 10-15 minutes before attempting to relight the pilot. If you continue to smell any gas, do not continue! You may have a leak, in which case, you should evacuate the household immediately and call your gas company and the fire department at a safe distance. If you have any doubts, don’t hesitate to contact us.

 

Properly secure front panel

Furnace repair Edmonton

Follow your manufacturer’s instructions for properly securing the access panel. Many furnaces will not operate if the panel is not pressed in all the way. Ensure all vents and registers are open and unblocked Sometimes, your furnace is running but your rooms aren’t getting the proper heat or airflow. Inspect your entire home for all the supply and return grills. They should all be fully opened and unobstructed. Make sure there are no rugs, furniture, or anything else restricting the flow of air. Not only will blocked vents and registers affect your comfort, they can also lead to duct leaks due to excessive air pressure and premature HVAC repairs and breakdowns. Closing off vents and registers in unused rooms is NOT a good idea. You won’t save any extra money and will end up causing more problems for your heating system. Furnace Troubleshooting Recap:

 

Clean or replace air filter

Furnace repair Edmonton

Troubleshoot thermostat problems — replace batteries if necessary Set thermostat to heat and at a higher temperature than the current room temperature Check electrical panel for blown fuses or tripped breakers Make power switch near furnace is flipped on Check pilot light, relight pilot light if needed Open all vents and registers Properly mount and fasten access panels (as a safety mechanism, some furnaces won’t turn on if access panels are not properly installed) Contact a qualified HVAC professional Learn more furnace troubleshooting and repair tips. When in doubt, call a professional

 

 

Furnace Repair in  Edmonton Call 780 733-1256

Furnace Repair Edmonton

Furnace repair in Edmonton

 

 

With many years of experience repairing furnaces in the Edmonton area, we can guarantee that we will provide you with knowledgeable, experienced and professional service!

 

Does your furnace need to be serviced? Unsure if you need the help of a professional?

Give us a call anytime for a consultation on your situation. You can also fill out our furnace repair form below and a Legacy Heating and Cooling representative will contact you to schedule an appointment.


Some Great Tips from Service Champions

A furnace is crucial for comfort and survival in cold winter weather. Without it, we would still be huddling around wood fires to stay warm. Unfortunately, furnaces need regular professional tune-ups and homeowner upkeep to run strongly and efficiently.

Even with proper maintenance, however, furnaces can break down and develop problems that impede regular functioning. If your furnace is acting up or refusing to turn on, go over these furnace troubleshooting tips first, before you call in the pros.

Check furnace filter

Furnace repair Edmonton

The first thing you want to check is the air filter. Over time, furnace filters get dirty. Dirt and dust can quickly clog the filter, which impedes airflow, worsens indoor air quality, and can even prevent the furnace from turning on in some cases. It can also become a fire hazard and cause premature breakdowns due to excessive dust and dirt. Turn your thermostat off and flip the furnace switch off before you conduct any work on the furnace. Check your air filter every 30 days (set calendar reminders). Hold your filter up to a light source — if light cannot pass through easily, it should be cleaned or replaced. When installing your new filter, remember that the arrows should point in the direction of the airflow. Make sure you properly secure the access panel.

 

Check the thermostat

Furnace repair Edmonton

After verifying that your furnace filter is clean and installed properly, check the thermostat. Make sure it is set to “heat” and try setting the temperature at least 5 degrees higher than the current room temperature. If the thermostat needs new batteries, replace them. For electromechanical thermostats, you may need to open it up and give it a gentle dusting. Use a soft paintbrush or something similar to lightly brush off dirt and dust, including around the metal coils and contact plates. If your brush is too large, try a soft paper. Check the location of your thermostat and make sure it isn’t receiving any false readings from sunlight, lamps, ovens, space heaters, or any other heat source. If the thermostat is receiving the wrong input, it will send out the wrong output.

 

Check furnace switch and electrical panel

Furnace repair Edmonton

Sometimes, the filter and thermostat are fine. Instead, power could be the problem. Check the furnace switch located near the furnace. Someone may have accidentally turned it off. Try flipping it back on. If that doesn’t work, head to the electrical panel. Make sure power is turned on at the breaker box or fuse box. If your breaker box is properly labeled, make sure the HVAC breaker is on. Even if you don’t have any labels, look for the breaker switch that is in the opposite direction of the rest. That is the breaker you want to switch back on with the rest. To reset your breaker, flip the switch all the way off before flipping it back on again. You should hear a click. To restore power to a fuse box, look for a melted and discolored fuse. Unscrew the fuse and replace it with the exact same size and type of fuse. The best way to find fuse replacements is to go to the store with a current fuse and replace it with an identical one. Turn your furnace switch on and see if this restored power to your furnace. If the power is still out or the breaker continues to trip, contact a professional. Warning: Make sure your hands and feet are completely dry before attempting to reset power. If there are any signs of electrical damage or moisture, or you don’t feel comfortable, don’t touch anything and contact a qualified electrician right away.

 

Check furnace flame

Furnace repair Edmonton

Your furnace flame should be a healthy blue color, with perhaps a small yellowish tip. The blue flame indicates that your gas furnace is burning the fuel safely and efficiently. If the flame is red, yellow, purple, green, or any other color than blue, contact a professional right away. Never attempt to fix your furnace flame color on your own.

 

Pilot light and gas valve

Furnace repair Edmonton

If you go to check the furnace flame and it is out, you will need to relight it. While you can relight the pilot on your own, be extra careful and consult your owner’s manual for proper instructions. Don’t forget to turn off the gas for around 10-15 minutes before attempting to relight the pilot. If you continue to smell any gas, do not continue! You may have a leak, in which case, you should evacuate the household immediately and call your gas company and the fire department at a safe distance. If you have any doubts, don’t hesitate to contact us.

 

Properly secure front panel

Furnace repair Edmonton

Follow your manufacturer’s instructions for properly securing the access panel. Many furnaces will not operate if the panel is not pressed in all the way. Ensure all vents and registers are open and unblocked Sometimes, your furnace is running but your rooms aren’t getting the proper heat or airflow. Inspect your entire home for all the supply and return grills. They should all be fully opened and unobstructed. Make sure there are no rugs, furniture, or anything else restricting the flow of air. Not only will blocked vents and registers affect your comfort, they can also lead to duct leaks due to excessive air pressure and premature HVAC repairs and breakdowns. Closing off vents and registers in unused rooms is NOT a good idea. You won’t save any extra money and will end up causing more problems for your heating system. Furnace Troubleshooting Recap:

 

Clean or replace air filter

Furnace repair Edmonton

Troubleshoot thermostat problems — replace batteries if necessary Set thermostat to heat and at a higher temperature than the current room temperature Check electrical panel for blown fuses or tripped breakers Make power switch near furnace is flipped on Check pilot light, relight pilot light if needed Open all vents and registers Properly mount and fasten access panels (as a safety mechanism, some furnaces won’t turn on if access panels are not properly installed) Contact a qualified HVAC professional Learn more furnace troubleshooting and repair tips. When in doubt, call a professional

 

 

Furnace Repair Edmonton

Furnace Repair Edmonton - Prepare for Winter Before It Arrives

Even though we are still enjoying warm weather and winter seems far away, now is a great time to begin preparing. If you do a bit at a time before winter hits the tasks are not at all overwhelming.
So often, people wait until the last minute to take care of necessary duties. Worst yet, some people wait until snow or rain is pouring down to even begin thinking of what needs to be done.
Safety should be a top priority. Assess the quality of your indoor air. You can easily create an indoor health hazard with poor quality air. If you have excessive dust or dirt, take steps to clean it up.
Make sure your smoke detectors are in good working order. They can literally save your life. If you don’t have detectors throughout your home, you need to make that a top priority on your “honey-do” list. Better yet, don’t wait for someone else to take care of this most important task, do it yourself as soon as possible.
Have your fireplace inspected to insure it is safe to use. If your area permits you to burn during the winter, stock up on wood while the weather is pleasant.
Secure vents, fans and air conditioners. Properly cover as recommended by the manufacturer.
Remember to check both the inside and out. Make a list of any repairs as you go through the house. To help you determine where any leaks are, on the next windy day do a walk through to determine areas in need of repair.
Fix Doors and Windows
Replace or add weather-stripping where needed.
Winterize basement windows.
Replace old windows with weather efficient windows.
Have your furnace serviced before the winter rush hits. Many companies run specials before the season.
Check for mold and algae within your home furnace. You’d be amazed at what can grow during the summer months. Although mold burns off it is distributed throughout your home.
Stock up on furnace filters. It is better to have some on hand so you can easily replace throughout the winter.
Use caulking to fix any leaky areas.
Locate all you winter supplies such as walkway shovel, ice melt, gloves, hats, scarves and anything else you will need when a storm hits. If you don’t have these items buy them before a winter storm hits and stores run out. Make sure your snowplow is in good working order. A preseason equipment check up is advisable.
By being prepared you will be able to share more time with your loved ones. Besides, you will probably be able to save on your energy bills as well.

Things to look for

Why is my furnace running but no heat?

Furnace Repair in Edmonton

Do this: Ensure your thermostat's fan setting is set to AUTO, not ON. AUTO ensures that the blower will run only when the furnace heats the air. Your furnace may be blowing cold air because the filter is too dirty. ... If the pilot light isn't lit, then the furnace's burners won't light, meaning no heat.

 

How do you reset a furnace?

Furnace Repair in Edmonton

How to Find My Furnace Motor Reset Button Turn off the power to the furnace at the circuit breaker. The circuit breaker is clearly marked. ... Lift up the blower compartment cover to access the blower wheel and blower motor. ... Look for a small red or yellow button on the side of the blower motor. ... Press the reset button down if it has popped up.

 

What do you do when your furnace goes out?

heating and cooling edmonton

Turn off the furnace shutoff switch and turn off the thermostat before inspecting and replacing dirty filters. Inspect your air ducts: If you're getting heat in some rooms, but not all, check the air ducts and make sure the dampers that control airflow are completely open.

 

What causes a furnace blower to stop working?

A furnace blower motor that stops pushing warm air out is not the same as a blower that is forcing only cold air into your home. If you have cool air but a steady airflow, your blower motor is working but your heat exchanger or burner is not. ... Inspect the heat exchanger for cracks, which can cause a safety hazard.

 

 

 

 

Air Conditioning Repair Service Edmonton

When it's time to book an air conditioner repair call (780) 733-1256

It can be nerve-racking when your air conditioner starts to act up. There are lots of factors that cause AC systems to malfunction; some you may be able to troubleshoot yourself, others require an HVAC professional. If you are comfortable doing troubleshooting yourself, we recommend following our AC Troubleshooting Guide.

Call for a quick AC consultation

If you are unsure whether you need professional help, you can always call Legacy for a quick consultation.

With many decades of experience in air conditioner repair in the Edmonton area, we know the most efficient and effective solutions for all your air conditioner problems.

We guarantee you the most knowledgeable, experienced and professional service around. We never suggest a customer book an air conditioner repair service unless it is truly necessary.

Book an air conditioner repair service

If you know you need the assistance of an HVAC professional, call us immediately or use the form below to schedule a repair service that works with your schedule.

How much does it cost to fix an air conditioner?

heating and cooling edmonton

The only fix for this is a costly replacement of the equipment, which includes various small parts, new Freon, and labor. Cost: $500 to $2,100. It might be wise to replace your air conditioner if it's more than eight years old, or if the estimated cost of repair is more than 50% of the cost of a new unit.

 

Legacy Heating and Cooling has extensive experience and knowledge in HVAC systems! Call (780) 733-1256

Air Conditioning Repair EdmontonAir Conditioning Repair Edmonton-Legacy Heating and Cooling

At Legacy, we specialize in HVAC systems for residential new home construction (RNC) and installation and replacement of furnaces, air conditioners, air cleaners, thermostats, humidifiers, heat recovery ventilation (HRV) units, humidifiers, and unit heaters, as well as other HVAC products!

Your Edmonton Air Conditioning Repair Leaders

Why choose Legacy Heating & Cooling Ltd.?

  • We take the time to listen and understand your needs. Our HVAC service technicians will always help you understand your options and provide professional and reliable advice.
  • Free quotes on a new furnace or air conditioner installations or replacements
  • Furnace registration to make sure your manufacture warranty is on record
  • A highly competitive preventative maintenance HVAC Program that saves you money long-term and offers priority service
  • 24-hour furnace repair and air conditioner repair
  • Financial plans that work for your budget
  • Coordination with the city for inspection of new heating and cooling systems

 

Some tips below.

 

• Keeping the cool air inside is just as important as keeping the warm air outside. Caulking, weather stripping, and adding additional attic insulation will help keep cool air inside during the summer.

• Make sure the air is flowing properly through the vents. Inspect the ductwork for holes or separated joints, and hire a professional to repair them.

• Add insulation around air-conditioning ducts, when they are located in unconditioned spaces, such as attics, crawl spaces and garages; do the same for whole house fans where they open to the exterior or attic.

• Homeowners should check the SEER (seasonal energy efficiency ratio) rating of their air-conditioning unit. The higher the SEER rating, the more energy efficient the unit is and the lower your utility bills will be. Upgrading to a higher SEER rating can save homeowners hundreds of dollars a year on their energy bills.

If the air-conditioning unit needs to be replaced, homeowners should be aware of the U.S. Department of Energy legislation that requires all new, central air-conditioning units manufactured after January 23, 2006, to have a SEER of at least 13.

Consumers may want to consider an energy-efficient model, such as the Coleman Echelon™ 15+ SEER air conditioner. New models are Energy Star® qualified, use environmentally friendly refrigerant and have high-efficiency scroll compressors that enhance reliability and contribute to the extremely quiet operation of the units.

 

Furnace Repair Edmonton

Dirt is the biggest enemy of your furnace. It can waste fuel and drastically lower efficiency. Dirt affects all three basic components of your furnace, so cleaning is the most important part of regular maintenance. The three parts of the furnace should be cleaned: the filter system, the blower, and the motor.

The furnace filter should be replaced or cleaned at the beginning of the heating season and about once a month during periods of continuous use. To check the filter, take it out and hold it up to the light. If it looks clogged, replace it with a new filter of the same type and size regardless of the length of time it has been used.

 

To date we have installed, repaired, or replaced commercial HVAC systems for:

Air Conditioning Repair Edmonton Canada

 

We have successfully completed many HVAC projects in Edmonton.

Including projects for the following organizations and businesses, plus many more:

  • Home Depot
  • ATB Financial
  • St. Basil School
  • Comfort Inn
  • Staples
  • BuyBuy Baby
  • Tim Hortons
  • Subway
  • Pizza 73
  • Mucho Burrito
  • Canadian National Department of Defence
  • Shoppers Drug Mart
  • Audi Edmonton
  • WalMart
  • Marriott Hotel
  • Hyatt Place

Air Conditioning Maintenace and repair Edmonton

The benefits of HVAC Maintenance are long-term and significant

Air Conditioning Maintenace and repair Edmonton

HVAC service repair and maintenance

  • Regular service maintenance saves you money in the long run. 
    Studies indicate that regular service can reduce energy bills as much as 30% and increase the longevity of your equipment.
  • Service maintenance is the easiest way to protect your investment.
    Maintenance ensures your system is running as efficiently, effectively, and safely as possible.

Local Edmonton Trane Dealer

 

 

Local Edmonton Goodman Dealer

 

4 reviews・1 photo
The service was really good. I had them do my redo the whole heating down the basement and they did it within the time frame and the budget we worked with. Pleasant and professional company. 10/10 would recommend to any new home owner or home builder.
1 review
They came within a few hours of my call, very nice to deal with, i will be using these guys again in the future.

Allen Hope

1 review
I called Legacy Heating to service my furnace as I had no heat. They came quickly and fixed it, and were friendly and affordable. Definitely recommend!
Lee Martini
13 reviews・1 photo
Woke up boxing day to no heat, called them up and they came out about within the hour and got it going plus did a service on it. Very reasonable price being boxing day morning..great service!
Local Guide・13 reviews・40 photos
Awesome and friendly customer service, my furnace wasn't working and they sent their on call technician out quickly and he was able to figure out the simple solution to my problem and had it fixed the same day... highly recommended!
Ryan McFadden
8 reviews
Fixed my furnace last minute at 1am. Can't say enough good things about the service from Legacy.

Our Edmonton Office

 

central air conditioning edmonton

New Central Air Conditioning Units Can Save Energy and money so Call (780) 733-1256

Central air just makes sense, as it keeps the indoor temperatures comfortable while filtering and dehumidifying the air. This is particularly nice for people who suffer from allergies or asthma. Fortunately, central air conditioning units can be installed in preexisting homes, as well.

When shopping around for central air conditioning units, there are several things to consider. One is the size of the home you will be cooling. Air conditioning units come in different sizes, so it is important to choose the most efficient size for the cooling job you have in mind. If the unit is too large, it won't dehumidify properly. To determine the right size, consult a contractor. They should have access to a calculation method called "Manual J" that can help you choose a size.

Another important consideration in central air conditioning units is a rating called the SEER rating. These letters stand for Seasonal Energy Efficiency Ratio. New air conditioners are required to have a rating of 13. A unit that was installed over twenty years ago probably has a rating of only 7 or 8. This is because technology has improved energy efficiency.

By replacing old inefficient air conditioners with new central air conditioning units, you can save a lot of money in cooling costs. It is estimated that increasing the SEER rating from 11.5 to 13 could save you over $500 each year in cooling costs. Also, look for "Scroll(tm) technology" when choosing a compressor for the latest in efficiency.

Another thing to look for in central air conditioning units is the "Energy Star." This is a certification given to new appliances that use less energy than other new models. Of course, they use a lot less than equivalent units that are several years old.

When installing central air conditioning units, the location of the outdoor unit can make a big difference. If it is surrounded by vegetation or is under a deck, the air will not be able to flow freely in and out of it. Not only that, the units can be noisy. Don't install it near an area where you like to enjoy eating or visiting outdoors, such as a patio or deck.

 

Central Air Conditioning Edmonton

 

Central Air Conditioning Edmonton - Legacy Heating and Cooling

At Legacy, we specialize in HVAC systems for residential new home construction (RNC) and installation and replacement of furnaces, air conditioners, air cleaners, thermostats, humidifiers, heat recovery ventilation (HRV) units, humidifiers, and unit heaters, as well as other HVAC products!

Why choose Legacy Heating & Cooling Ltd.?

  • We take the time to listen and understand your needs. Our HVAC service technicians will always help you understand your options and provide professional and reliable advice.
  • Free quotes on a new furnace or air conditioner installations or replacements
  • Furnace registration to make sure your manufacture warranty is on record
  • A highly competitive preventative maintenance HVAC Program that saves you money long-term and offers priority service
  • 24-hour furnace repair and air conditioner repair
  • Financial plans that work for your budget
  • Coordination with the city for inspection of new heating and cooling systems

Brands We're Proud To Carry

Legacy only uses the most efficient and cost-effective HVAC products.
We pride ourselves on putting quality and customers first!

Contact Us Today

We’ll help you find the right heating and air conditioning system for you and your budget.

Subscribe to Our Newsletter

SUBSCRIBE NOW
Copyright © 2019 | Privacy Policy
Powered By: Social Hero Media
phoneenvelope
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram